Seam sealing mass – Leubit https://www.leubit.de/en/ Fri, 15 Dec 2017 14:50:35 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.5 17 HVM-Typ N2 https://www.leubit.de/en/produkt/17-hvm-typ-n2/ Thu, 13 Jul 2017 14:21:53 +0000 http://www.leubit.de/?post_type=produkt&p=1278/ Continued]]>
13 kg cardboard box
48 boxes per pallet

Consumption in grammes:
Joint length (cm) x joint width (cm) x joint depth (cm) x joint compound density (g/cc)

  • LEUBIT® HVM type N2 is ideal for sealing joints in concrete road surfaces and structures in construction and excavation, transitions between asphalt concrete and bridge decks, and repair work on asphalt surfaces.
  • For use in commercial applications only.
  • Apply LEUBIT® HVM type N2 in dry weather, not during rain or frost. The surface temperature should be above 0°C.
  • Clean the damaged area using a sweeper or compressed air before beginning repair work. The surface should be dry and free of dirt or other contaminants.
  • Carefully melt LEUBIT® HVM type N2 in a melting vessel equipped with a mechanical stirrer, indirect heating and thermostat to the application temperature of 160–180°C. Avoid overheating the joint compound to more than 180°C as this will inevitably damage the polymer additives in the compound.
  • Prime the damage site with  LEUBIT® Primer Plus according to the instructions for the product.
  • Use suitable lances or canisters to fill the product into the joints.
  • Make sure that the LEUBIT® HVM type N2 is at the specified application temperature during application to avoid loss of fluidity and risk of cavitation.
  • The joint compound may lose volume after cooling depending on the dimensions of the joint to be filled, and the filling process will need to be repeated. We recommend subsequent joint filling immediately after completing the initial work.
  • Die Schadstelle mit anweisungsgerecht vorbehandeln
  • Store in a dry place protected from sunlight at more than 50°C
  • Sensitive to frost
  • Storage life at least 5 years
  • Always dispose of empty canisters and residual content according to your local, regional, national or international regulations.
  • Use hand-washing paste in case of skin contact
  • Use cleaning solvent or other common solvents on equipment
  • Bitumen with polymer and other additives
]]> 18 paving grout https://www.leubit.de/en/produkt/18-paving-grout/ Tue, 05 Dec 2017 10:43:08 +0000 http://www.leubit.de/?post_type=produkt&p=2144/ Continued]]>
16 kg cardboard box
48 boxes per pallet
Consumption in grams: Joint length (cm) x joint width (cm) x joint depth (cm) x joint compound density (g/cc)

 

  • LEUBIT® paving grout is used for filling joints in all kinds of paving and flagstone surfacing.
  • Apply LEUBIT® paving grout in dry weather, not during rain or frost. The surface temperature should be above 0°C.
  • Clean the joint using a sweeper or compressed air before applying the product in repairing the joint. The surface should be dry and free of dirt or other contaminants.
  • Carefully melt LEUBIT® paving grout in a melting vessel equipped with a mechanical stirrer, indirect heating and thermostat up to the application temperature of 160–190°C. Avoid overheating the grout to more than 190°C as this will inevitably damage the polymer additives in the grout.
  • Prime the joint using LEUBIT® primer plus according to the instructions for the product.
  • Use suitable lances or canisters to grout the joints.
  • Make sure that the LEUBIT® paving grout is at the specified application temperature during application to avoid loss of fluidity and risk of cavitation.
  • LEUBIT® paving grout may lose volume after cooling depending on the dimensions of the joint to be filled, requiring repeat application. We recommend subsequent grouting immediately after completing the initial application.
  • The joint should be grouted in such a way that you should not need to knock off any excess grout rising above the edges of the joint. Knocking off excess grout may negatively affect the adhesion to the sides of the joint.
  • Store in a dry place protected from sunlight at more than 50°C
  • Sensitive to frost below -5°C
  • Storage life: at least 5 years
  • Always dispose of empty canisters and residual content according to your local, regional, national or international regulations.
  • Use hand-washing paste in case of skin contact
  • Use 10_LEUBIT eco cleaner, common solvents, or cleaning spirits on machinery.
  • Bitumen and minerals
]]> 22 TOK® Band Spezial 35×8 https://www.leubit.de/en/produkt/22-tok-band-spezial-35x8/ Fri, 14 Jul 2017 13:21:24 +0000 http://www.leubit.de/?post_type=produkt&p=1282/ Continued]]>
  • Excellent quality.
  • Fast and efficient application.
  • Tested according to the supplemental regulations to the German road asphalt joints directive (ZTV Fug-StB).
Profile in mm Single roll length Number of rolls per cardboard box Metres per cardboard box Metres per pallet
35×8 mm 12 4 48 1.440

Other dimensions available on request

]]> 23 TOK® Band Spezial 40×10 https://www.leubit.de/en/produkt/23-tok-band-spezial-40x10/ Fri, 14 Jul 2017 13:24:50 +0000 http://www.leubit.de/?post_type=produkt&p=1288/ Continued]]>
  • World’s first self-adhesive bitumen joint tape.
  • No primer required.
  • No gas torch required to melt the tape on.
  • Tested according to the supplemental regulations to the German road asphalt joints directive (ZTV Fug-StB).
  • Fast and efficient application.
Profile in mm Single roll length in metres Number of rolls per cardboard Metres per cardboard box Metres per pallet
40×10 mm 10 3 30 900

Other dimensions available on request

]]> 24 TOK® Band SK 35×8 https://www.leubit.de/en/produkt/24-tok-band-sk-35x8/ Fri, 14 Jul 2017 13:25:14 +0000 http://www.leubit.de/?post_type=produkt&p=1292/ Continued]]>
  • Excellent quality.
  • Fast and efficient application.
  • Tested according to the supplemental regulations to the German road asphalt joints directive (ZTV Fug-StB).
Profile in mm Single roll length Number of rolls per cardboard boxn Metres per cardboard box Metres per pallet
35×8 mm 12 4 48 1.440

Other dimensions available on request

]]> 25 TOK® Band SK 40×10 https://www.leubit.de/en/produkt/25-tok-band-sk-40x10/ Fri, 14 Jul 2017 13:26:03 +0000 http://www.leubit.de/?post_type=produkt&p=1300/ Continued]]>
  • World’s first self-adhesive bitumen joint tape.
  • No primer required.
  • No gas torch required to melt the tape on.
  • Tested according to the supplemental regulations to the German road asphalt joints directive (ZTV Fug-StB).
  • Fast and efficient application.
Profile in mm Single roll length Number of rolls per cardboard box Metres per cardboard box Metres per pallet
40×10 mm 10 3 30 900

Other dimensions available on request

]]>